AI Paraphrasing Tool

AI Paraphrasing Tool — hands-on reviews, top picks, pricing, pros and cons and a practical how-to guide on Aizhi.

Advanced automation functions

In automation production technology the actions performed by an automated process are executed by a program of instructions which is run during a work cycle. To execute work cycle programs, an automated system should be available to execute these advanced functions. == Safety monitoring == If there is a need for workers in an automated system, a safety monitoring is required for the occupational safety and health of the workers. In a safety monitoring various steps can take place including a complete stop of the system, sounding an alarm or reducing the operating speed. Usually, limiting switches are sensors like temperature probes, heat and smoke detectors or pressure sensitive floor pads. == Maintenance and repair diagnostics == There are three modes of operations which are used in a cycle of maintenance and repair diagnostics: status monitoring, failure diagnostics and recommendation of the repair procedure. In the status monitoring mode, the current system status is displayed. The failure diagnostics mode takes place when a failure occurs. The system will then suggest an adequate repair procedure to a team of experts. == Error detection and recovery == The error detection mode is a step to determine if and when a failure occurs in automated system. The possible errors can be divided into three categories. random errors, systematic errors and aberrations. While in the error recovery mode, remedy actions take place for all detected errors.
Read more →
Media Auxiliary Memory

Media Auxiliary Memory or Medium Auxiliary Memory (MAM) refers to a chip embedded into a digital media device (usually a tape cartridge) that stores a small amount of data or metadata that a computer can read without having to read the actual tape. MAMs can be used by the tape driver to increase efficiency, or by custom software to store & retrieve custom data. Some examples of MAM's are Cartridge Memory (HP/Seagate/IBM LTO) and MIC (Sony AIT).
Read more →
Verge3D

Verge3D is a real-time renderer and a toolkit used for creating interactive 3D experiences running on websites. == Overview == Verge3D enables users to convert content from 3D modelling tools (Blender, 3ds Max, and Maya are currently supported) to view in a web browser. Verge3D was created by the same core group of software engineers that previously created the Blend4Web framework. == Features == Verge3D uses WebGL for rendering. It incorporates components of the Three.js library and exposes its API to application developers. Puzzles Application functionality can be added via JavaScript, either by writing code directly or by using Puzzles, Verge3D’s visual programming environment based on Google Blockly. Puzzles is aimed primarily at non-programmers allowing quick creation of interactive scenarios in a drag-and-drop fashion. App Manager and web publishing App Manager is a lightweight web-based tool for creating, managing and publishing Verge3D projects, running on top of the local development server. Verge3D Network service integrated in the App Manager allows for publishing Verge3D applications via Amazon S3 and EC2 cloud services. PBR For purposes of authoring materials, a glTF 2.0-compliant physically based rendering pipeline is offered alongside the standard shader-based approach. PBR textures can be authored using external texturing software such as Substance Painter for which Verge3D offers the corresponding export preset. Besides the glTF 2.0 model, Verge3D supports physical materials of 3ds Max and Maya (with Autodesk Arnold as reference), and Blender's real-time Eevee materials. glTF and DCC software integration Verge3D integrates directly with Blender, 3ds Max, and Maya, enabling users to create 3D geometry, materials, and animations inside the software, then export them in the JSON-based glTF format. The Sneak Peek feature allows for exporting and viewing scenes from the DCC tool environment. Facebook 3D posts For Facebook publishing, Verge3D offers a specific GLB export option. The exported GLB files are displayed and can be opened in the App Manager. Asset compression Exported files can optionally use LZMA compression, resulting in a reduction in file size of up to 6x. UI and website layouts Interface layouts, created using external WYSIWYG editors, can be linked with Puzzles to trigger changes to a 3D scene being rendered in the browser and vice versa. Animation Verge3D supports skeletal animation, including animation of bipeds and character rigs, and allows for animation of material parameters. Model parts can also be set up to be dragged by the user. Physics The physics module can be linked separately to enable collision detection, dynamically moving objects, support for characters and vehicles, springs, ropes and cloth simulation. As of version 2.11, simple physics simulations can be created and controlled without coding via Puzzles, the visual programming system used by Verge3D. AR/VR The 2.10 update added support for WebXR, an in-development open technology designed to enable virtual reality and augmented reality experiences to be displayed in web browsers. It works with both headsets with controllers, like the HTC Vive and Oculus Rift, and those without, like Google Cardboard. AR/VR experiences can enabled via Puzzles or JavaScript. == Workflow == Verge3D's workflow differs substantially from other mainstream WebGL frameworks. Development of a new Verge3D application is usually started from modeling, texturing and animating 3D objects. The models are assembled in the 3D authoring tool. The scene file is then used as a basis for a Verge3D project initialized from the App Manager. An interactive scenario is optionally added using the Puzzles editor. A Verge3D application can be previewed in the web browser at any development stage using the App Manager. The finished web application can be deployed on the Verge3D Network, on Facebook or on the user's website. == Notable uses == NASA's Jet Propulsion Laboratory used Verge3D to create an interactive 3D visualization of the Mars InSight lander. The web application allows for exploring and interacting with the real-time model of the spacecraft, with the possibility to move different parts and unfurl the solar panels. NASA's older interactive web application Experience Curiosity was ported to Verge3D from Blend4Web. The application makes it possible to operate the rover, control its cameras and the robotic arm and reproduces some of the prominent events of the Mars Science Laboratory mission. Route 66 Digital's Escape Room used Verge3D and Blender. This interactive short explores how users can navigate 3D spaces and interact with objects without the need for instruction.
Read more →
Ambient awareness

Ambient awareness (AmA) is a term used by social scientists to describe a form of peripheral social awareness through social media. This awareness is propagated from relatively constant contact with one's friends and colleagues via social networking platforms on the Internet. The term essentially defines the sort of omnipresent knowledge one experiences by being a regular user of these media outlets that allow a constant connection with one's social circle. According to Clive Thompson of The New York Times, ambient awareness is "very much like being physically near someone and picking up on mood through the little things; body language, sighs, stray comments". Academic Andreas Kaplan defines ambient awareness as "awareness created through regular and constant reception, and/or exchange of information fragments through social media". Two friends who regularly follow one another's digital information can already be aware of each other's lives without actually being physically present to have had a conversation. == Social == Socially speaking, ambient awareness and social media are products of the new generations who are being born or growing up in the digital age, starting circa 1998 and running to current times. Social media is personal media (what you're doing in the moment, how you feel, a picture of where you are) combined with social communication. Social media is the lattice work for ambient awareness. Without social media the state of ambient awareness cannot exist. Artificial Social Networking Intelligence (ASNI) refers to the application of artificial intelligence within social networking services and social media platforms. It encompasses various technologies and techniques used to automate, personalize, enhance, improve, and synchronize user's interactions and experiences within social networks. ASNI is expected to evolve rapidly, influencing how we interact online and shaping their digital experiences. Transparency, ethical considerations, media influence bias, and user control over data will be crucial to ensure responsible development and positive impact. A significant feature of social media is that it is created by those who also consume it. Mostly, those participating in this phenomenon are adolescents, college age, or young adult professionals. According to Dr. Mimi Ito, a cultural anthropologist and Professor in Residence at the University of California at Irvine, the mobile device is the greatest proxy device used to create and distribute Social Media. She reportedly states that "teenagers capture and produce their own media, and stay in constant ambient contact with each other..." using mobile devices. Usually while doing this they are consuming other forms of media such as music or video content via their smart phones, tablets, or other similar devices. Effectively this has led social scientists to believe that learning and multitasking will have a new face as the products of the digital generation enter the work force and begin to integrate their learning methods into the standard preexisting business models of today. Professors Kaplan and Haenlein see ambient awareness as one of the major reasons for the success of such microblogging sites as Twitter. == Origins == The earliest available technology that could be used for constant social contact is the cell phone. For the first time, people could be contacted readily and at will beyond the confines of their work or homes. Then later, with the additional service of texting, one can see the somewhat primitive form of the status update. Since the text message only allows for 160 characters to transmit pertinent information it paved the way for the status update as we know it today. The transition from only having a few points of regular long distance contact, to being constantly available via cell phone, is what primed society for social networking websites. Perhaps the first instance where these websites created the possibility of larger scale ambient awareness was when Facebook installed the news feed. The news feed automatically sends compiled information on all of a users contacts activities directly to them so that they can access all of the happenings in their world from one location. For the first time, becoming someone's Facebook friend was the equivalent of subscribing to a feed of their daily minutiae. Since this innovation, a new wave of micro-blogging services have emerged, such as Twitter or Tumblr. Although these services have often been criticized as containing seemingly meaningless snippets of information, when a follower gathers a certain amount of information, they begin to obtain an ambient understanding of who they are following. This has led to the mass usage of social media as not only a social tool but also as a marketing and business tool. == Uses in marketing == Websites such as Twitter, YouTube, Facebook, and Myspace, among many others, have been used by people in all forms of business to create a closer digital/ambient bond with their clientele base. This is most notably seen in the music industry where social media networking has become the mainstay of all advertising for independent and major artists. The effect of this type of ambient marketing is that the consumer begins to get a sense of the artist's life style and personality. In this way social media outlets and ambient awareness have managed to tighten the gap between consumers and producers in all areas of business. == Uses in business processes == As web-based collaboration tools and social project management suites proliferate, the addition of activity streams to those products help to create business context-specific ambient awareness, and produce a new class of products, such as social project management platforms.
Read more →
Weak artificial intelligence

Weak artificial intelligence (weak AI) is artificial intelligence that implements a limited part of the mind, or, as narrow AI, artificial narrow intelligence (ANI), is focused on one narrow task. Weak AI is contrasted with strong AI, which can be interpreted in various ways: Artificial general intelligence (AGI): a machine with the ability to apply intelligence to any problem, rather than just one specific problem. Artificial superintelligence (ASI): a machine with a vastly superior intelligence to the average human being. Artificial consciousness: a machine that has consciousness, sentience and mind (John Searle uses "strong AI" in this sense). Narrow AI can be classified as being "limited to a single, narrowly defined task. Most modern AI systems would be classified in this category." Artificial general intelligence is conversely the opposite. == Applications and risks == Some examples of narrow AI are AlphaGo, self-driving cars, robot systems used in the medical field, and diagnostic doctors. Narrow AI systems are sometimes dangerous if unreliable. And the behavior that it follows can become inconsistent. It could be difficult for the AI to grasp complex patterns and get to a solution that works reliably in various environments. This "brittleness" can cause it to fail in unpredictable ways. Narrow AI failures can sometimes have significant consequences. It could for example cause disruptions in the electric grid, damage nuclear power plants, cause global economic problems, and misdirect autonomous vehicles. Medicines could be incorrectly sorted and distributed. Also, medical diagnoses can ultimately have serious and sometimes deadly consequences if the AI is faulty or biased. Simple AI programs have already worked their way into society, oftentimes unnoticed by the public. Autocorrection for typing, speech recognition for speech-to-text programs, and vast expansions in the data science fields are examples. Narrow AI has also been the subject of some controversy, including resulting in unfair prison sentences, discrimination against women in the workplace for hiring, resulting in death via autonomous driving, among other cases. Despite being "narrow" AI, recommender systems are efficient at predicting user reactions based on their posts, patterns, or trends. For instance, TikTok's "For You" algorithm can determine a user's interests or preferences in less than an hour. Some other social media AI systems are used to detect bots that may be involved in propaganda or other potentially malicious activities. == Weak AI versus strong AI == John Searle contests the possibility of strong AI (by which he means conscious AI). He further believes that the Turing test (created by Alan Turing and originally called the "imitation game", used to assess whether a machine can converse indistinguishably from a human) is not accurate or appropriate for testing whether an AI is "strong". Scholars such as Antonio Lieto have argued that the current research on both AI and cognitive modelling are perfectly aligned with the weak-AI hypothesis (that should not be confused with the "general" vs "narrow" AI distinction) and that the popular assumption that cognitively inspired AI systems espouse the strong AI hypothesis is ill-posed and problematic since "artificial models of brain and mind can be used to understand mental phenomena without pretending that that they are the real phenomena that they are modelling" (as, on the other hand, implied by the strong AI assumption).
Read more →
LTE (telecommunication)

In telecommunications, Long Term Evolution (LTE) is a standard for wireless broadband communication for cellular mobile devices and data terminals. It is considered to be a "transitional" 4G technology, and is therefore also referred to as 3.95G as a step above 3G. LTE is based on the 2G GSM/EDGE and 3G UMTS/HSPA standards. It improves on those standards' capacity and speed by using a different radio interface and core network improvements. LTE is the upgrade path for carriers with both GSM/UMTS networks and CDMA2000 networks. LTE has been succeeded by LTE Advanced, which is officially defined as a "true" 4G technology and also named "LTE+". == Terminology == The standard is developed by the 3GPP (3rd Generation Partnership Project) and is specified in its Release 8 document series, with minor enhancements described in Release 9. LTE is also called 3.95G and has been marketed as 4G LTE and Advanced 4G; but the original version did not meet the technical criteria of a 4G wireless service, as specified in the 3GPP Release 8 and 9 document series for LTE Advanced. The requirements were set forth by the ITU-R organisation in the IMT Advanced specification; but, because of market pressure and the significant advances that WiMAX, Evolved High Speed Packet Access, and LTE bring to the original 3G technologies, ITU-R later decided that LTE and the aforementioned technologies can be called 4G technologies. The LTE Advanced standard formally satisfies the ITU-R requirements for being considered IMT-Advanced. To differentiate LTE Advanced and WiMAX-Advanced from current 4G technologies, ITU has defined the latter as "True 4G". == Overview == LTE stands for Long Term Evolution and is a registered trademark owned by ETSI (European Telecommunications Standards Institute) for the wireless data communications technology and development of the GSM/UMTS standards. However, other nations and companies do play an active role in the LTE project. The goal of LTE was to increase the capacity and speed of wireless data networks using new DSP (digital signal processing) techniques and modulations that were developed around the turn of the millennium. A further goal was the redesign and simplification of the network architecture to an IP-based system with significantly reduced transfer latency compared with the 3G architecture. The LTE wireless interface is incompatible with 2G and 3G networks, so it must be operated on a separate radio spectrum. The idea of LTE was first proposed in 1998, with the use of the COFDM radio access technique to replace the CDMA and studying its Terrestrial use in the L band at 1428 MHz (TE) In 2004 by Japan's NTT Docomo, with studies on the standard officially commenced in 2005. In May 2007, the LTE/SAE Trial Initiative (LSTI) alliance was founded as a global collaboration between vendors and operators with the goal of verifying and promoting the new standard to ensure the global introduction of the technology as quickly as possible. The LTE standard was finalized in December 2008, and the first publicly available LTE service was launched by TeliaSonera in Oslo and Stockholm on December 14, 2009, as a data connection with a USB modem. The LTE services were launched by major North American carriers as well, with the Samsung SCH-r900 being the world's first LTE Mobile phone starting on September 21, 2010, and Samsung Galaxy Indulge being the world's first LTE smartphone starting on February 10, 2011, both offered by MetroPCS, and the HTC ThunderBolt offered by Verizon starting on March 17 being the second LTE smartphone to be sold commercially. In Canada, Rogers Wireless was the first to launch LTE network on July 7, 2011, offering the Sierra Wireless AirCard 313U USB mobile broadband modem, known as the "LTE Rocket stick" then followed closely by mobile devices from both HTC and Samsung. Initially, CDMA operators planned to upgrade to rival standards called UMB and WiMAX, but major CDMA operators (such as Verizon, Sprint and MetroPCS in the United States, Bell and Telus in Canada, au by KDDI in Japan, SK Telecom in South Korea and China Telecom/China Unicom in China) have announced instead they intend to migrate to LTE. The next version of LTE is LTE Advanced, which was standardized in March 2011. Services commenced in 2013. Additional evolution known as LTE Advanced Pro was approved in 2015. The LTE specification provides downlink peak rates of 300 Mbit/s, uplink peak rates of 75 Mbit/s, and QoS provisions permitting a transfer latency of less than 5 ms in the radio access network. LTE has the ability to manage fast-moving mobiles and supports multicast and broadcast streams. LTE supports scalable carrier bandwidths, from 1.4 MHz to 20 MHz and supports both frequency division duplexing (FDD) and time-division duplexing (TDD). The IP-based network architecture, called the Evolved Packet Core (EPC) designed to replace the GPRS Core Network, supports seamless handovers for both voice and data to cell towers with older network technology such as GSM, UMTS and CDMA2000. The simpler architecture results in lower operating costs (for example, each E-UTRA cell will support up to four times the data and voice capacity supported by HSPA). Because LTE frequencies and bands differ from country to country, only multi-band phones can use LTE in all countries where it is supported. == History == === 3GPP standard development timeline === In 2004, NTT Docomo of Japan proposes LTE as the international standard. In September 2006, Siemens Networks (today Nokia Networks) showed in collaboration with Nomor Research the first live emulation of an LTE network to the media and investors. As live applications, two users streaming an HDTV video in the downlink and playing an interactive game in the uplink have been demonstrated. In February 2007, Ericsson demonstrated for the first time in the world, LTE with bit rates up to 144 Mbit/s In September 2007, NTT Docomo demonstrated LTE data rates of 200 Mbit/s with power level below 100 mW during the test. In November 2007, Infineon presented the world's first RF transceiver named SMARTi LTE, supporting LTE functionality in a single-chip RF silicon processed in CMOS In early 2008, LTE test equipment began shipping from several vendors and at the Mobile World Congress 2008 in Barcelona, Ericsson demonstrated the world's first end-to-end mobile call enabled by LTE on a small handheld device. Motorola demonstrated an LTE RAN (Radio Access Network) standard compliant eNodeB and LTE chipset at the same event. At the February 2008 Mobile World Congress: Motorola demonstrated how LTE can accelerate the delivery of personal media experience with HD video demo streaming, HD video blogging, online gaming, and VoIP over LTE running a RAN standard-compliant LTE network & LTE chipset. Ericsson EMP (later ST-Ericsson) demonstrated the world's first end-to-end LTE call on handheld Ericsson demonstrated LTE FDD and TDD mode on the same base station platform. Freescale Semiconductor demonstrated streaming HD video with peak data rates of 96 Mbit/s downlink and 86 Mbit/s uplink. NXP Semiconductors (later part of ST-Ericsson) demonstrated a multi-mode LTE modem as the basis for a software-defined radio system for use in cellphones. picoChip and Mimoon demonstrated a base station reference design. This runs on a common hardware platform (multi-mode / software-defined radio) with their WiMAX architecture. In April 2008, Motorola demonstrated the first EV-DO to LTE hand-off handling over streaming a video from LTE to a commercial EV-DO network and back to LTE. In April 2008, LG Electronics and Nortel demonstrated LTE data rates of 50 Mbit/s while travelling at 110 km/h (68 mph). In November 2008, Motorola demonstrated industry first over-the-air LTE session in 700 MHz spectrum. Researchers at Nokia Siemens Networks and Heinrich Hertz Institut have demonstrated LTE with 100 Mbit/s Uplink transfer speeds. At the February 2009 Mobile World Congress: Infineon demonstrated a single-chip 65 nm CMOS RF transceiver providing 2G/3G/LTE functionality Launch of ng Connect program, a multi-industry consortium founded by Alcatel-Lucent to identify and develop wireless broadband applications. Motorola provided LTE drive tour on the streets of Barcelona to demonstrate LTE system performance in a real-life metropolitan RF environment In July 2009, Nujira demonstrated efficiencies of more than 60% for an 880 MHz LTE Power Amplifier In August 2009, Nortel and LG Electronics demonstrated the first successful handoff between CDMA and LTE networks in a standards-compliant manner In August 2009, Alcatel-Lucent receives FCC certification for LTE base stations for the 700 MHz spectrum band. In September 2009, Nokia Siemens Networks demonstrated the world's first LTE call on standards-compliant commercial software. In October 2009, Ericsson and Samsung demonstrated interoperability between the first ever commercial LTE device and the live network in
Read more →
Creepiness

Creepiness is the state of being creepy, or causing an unpleasant feeling of fear or unease to someone and/or something. Certain traits or hobbies may make people seem creepy to others; interest in horror or the macabre might come across as 'creepy', and often people who are perverted or exhibit predatory behavior are called 'creeps'. The internet, especially some functions of social media, has been described as increasingly creepy. Adam Kotsko has compared the modern conception of creepiness to the Freudian concept of unheimlich. The term has also been used to describe paranormal or supernatural phenomena. Some people have phobias which are irrational fears, which can make them perceive something as creepy. == History and studies == "Creepiness" is subjective: for example some dolls have been described as creepy, while what makes something "creepy" or "strange" to someone might seem normal to someone else. The adjective "creepy", referring to a feeling of creeping in the flesh, was first used in 1831, but it was Charles Dickens who coined and popularized the term "the creeps" in his 1849 novel David Copperfield. In the 20th century, association was made between involuntary celibacy and creepiness. The concept of creepiness has only recently been formally addressed in social media marketing. The sensation of creepiness has only recently been the subject of psychological research, despite the widespread colloquial use of the word throughout the years. Francis T. McAndrew of Knox College is the first psychologist to do an empirical study on creepiness. == Causes == The state of creepiness has been associated with "feeling scared, nervous, anxious or worried", "awkward or uncomfortable", "vulnerable or violated" in a study conducted by Watt et al. This state arises in the presence of a creepy element, which can be an individual or, as recently observed, new technologies. === Individuals === Creepiness can be caused by the appearance of an individual. Another study investigated the characteristics that make people creepy. Creepy people were thought to be more often male than female by an overwhelming majority of participants (around 95% of both male and female participants). Another study conducted by Watt et al. also found that participants associated the ectomorphic body type (more linear) with creepiness, more than the other two body types (51% vs mesomorphic, 24% and endomorphic, 23%). Other cues of creepiness included low hygiene, especially according to female participants, and a disheveled appearance. Participants also identified the face as an area with potentially creepy features: in particular the eyes and the teeth. Both of those physical features were deemed creepy not only for their unpleasant appearance (ex. squinty eyes or crooked teeth) but also for the movements and expressions they engaged it (ex. darting eye movements and odd smiles). In fact, appearance does not seem to be the only factor making an individual creepy: behaviors provide cues as well. Behaviors such as "being unusually quiet and staring (34%), following or lurking (15%), behaving abnormally (21%), or in a socially awkward, "sketchy" or suspicious way (20%)" are all contributing to a feeling of creepiness, as described by Watt et al.'s study. === Technology === In addition to other individuals, new technologies, such as marketing's targeted ads and AI, have been qualified as creepy. A study by Moore et al. described what aspect of marketing participants considered creepy. The main three reasons are the following: using invasive tactics, causing discomfort and violating of norms. Invasive tactics are practiced by marketers that know so much about the consumer that the ads are "creepily" personalized. Secondly, some ads create discomfort by making the consumer question "the motives of the company advertising the product". Finally, some ads violate social norms by having inappropriate content, for example by unnecessarily sexualizing it. It is marketing's extensive knowledge used in an improper way, together with a certain loss of control over our data, that creates a feeling of creepiness. Another creepy aspect of technology is human-looking AI: this phenomenon is called the uncanny valley. Humans find robots creepy when they start closely resembling humans. It has been hypothesized that the reason why they are viewed as creepy is because they violate our notion of how a robot should look. A study focusing on children's responses to this phenomenon found evidence to support the hypothesis. == Evolutionary explanation == Several studies have hypothesized that creepiness is an evolutionary response to potentially dangerous situations. It could be linked to a mechanism called agent detection which makes individuals expect malignant agents to be responsible for small changes in the environment. McAndrew et al. illustrates the idea with the example of a person hearing some noises while walking in a dark alley. That person would go in high alert, fearing that some dangerous individual was there. If that was not the case the loss would be small. If, on the other hand, a dangerous individual was actually in the alley and the person had not been alerted by this creepy feeling, the loss could have been significant. Creepiness would therefore serve the purpose of alerting us in situations in which the danger is not outright obvious but rather ambiguous. In this case, ambiguity both refers to the possible presence of a threat and to its nature, sexual or physical for example. Creepiness "may reside in between the unknowing and the fear" in the sense that individuals experiencing it are unsure if there truly is something to fear or not. Creepy characteristics are not simply caused by threat potential: in fact, ectomorphic body types are not the most powerful bodies and facial expressions are not a proxy of physical strength either. Therefore, creepiness is not only related to how threatening a characteristic is, in the sense of how dangerous and strong the individual can be. There are more facets to consider. Another characteristic of creepiness is unpredictable behavior. Unpredictability links back to this idea of ambiguity. When an individual is unpredictable it is not possible to tell when their behavior will turn violent: this adds to the ambiguity of a potentially dangerous situation. This theory is endorsed by studies. Not only is unpredictability directly listed as a creepy characteristic, but other behaviors, such as norm-breaking behaviors are indirectly linked with unpredictability. Such behaviors show that the individual does not conform to some social standards others would expect in a given situation. For example, the aforementioned staring at strangers or lack of hygiene—behaviors that make us uneasy or creeped out because they do not fit the norm and therefore are not expected. More generally, participants tended to define creepiness as "different" in the sense of not behaving, or looking, socially acceptable. Such differences point towards a "social mismatch". Humans have a natural system of detection of such mismatch: a physical feeling of coldness. When an individual is creeped out, they report feeling those "cold chills". This phenomenon has been studied by Leander et al, with relation to nonverbal mimicry in social interactions, meaning the unintentional copying of another's behavior. Inappropriate mimicry may leave a person feeling like something is off about the other. Absence of non-verbal mimicry in a friendly interaction, or the presence of it in a professional setting, raises suspicion as it does not follow the relevant social norms. Individuals are left wondering what other unusual behavior the other might engage in.
Read more →
Pridgen v University of Calgary

Pridgen v University of Calgary was freedom of speech case which took place in Alberta, Canada, in 2010. The case deals with two university students, Keith and Steven Pridgen, who were found guilty and punished by the University of Calgary in 2008, on grounds of "non-academic misconduct". The University of Calgary defines "non-academic misconduct" as:(a) conduct which causes injury to a person and/or damage to University property and/or the property of any member of the University community; (b) unauthorized removal and/or unauthorized possession of University property; and (c) conduct which seriously disrupts the lawful educational and related activities of other students and/or University staff.The Court of the Queen's Bench of Alberta found the University of Calgary to be wrong in prosecuting ten students, including the Pridgen brothers, in regards to comments made about a professor on Facebook. The key ruling in this case was that the universities are not exempt from, and that these students were in fact protected under, section 2(b) of the Charter of Rights and Freedoms. This case is notable as it highlights the jurisdiction of the Charter in terms of both new media technologies and university institutions in Canada. == Background == Keith and Steven Pridgen were undergraduate students at the University of Calgary in 2008. The twin brothers shared a Law and Society class being taught by Aruna Mitra. Professor Mitra was teaching this class for the first time in her career, and many of the students were very critical of her knowledge of the course. A Facebook page entitled “I NO Longer Fear Hell, I Took a Course with Aruna Mitra” was created, and many students began posting comments. In particular, Steven Pridgen's comment on November 13, 2007, read: “Somehow I think she just got lazy and gave everybody a 65....that's what I got. Does anybody know how to apply to have it remarked?” Many students had similar concerns to Pridgen's and after having their work re-marked, a number of them did in fact receive higher grades. Keith Pridgen also commented on August 26, 2008: “Hey fellow LWSO. Homees.. So I am quite sure Mitra is NO LONGER TEACHING ANY COURSES WITH THE U OF C !!!!! Remember when she told us she was a long-term professor? Well, Actually she was only sessional and picked up our class at the last moment because another prof wasn't able to do it ...lucky us. Well, anyways I think we should all congratulate ourselves for leaving a Mitra-free legacy for future students!” On September 4, 2008, Aruna Mitra complained about the Facebook page to the Interim Dean of the Faculty of Communication and Culture at the University of Calgary. Dean Tettey called a meeting for the ten students who posted material about Mitra on the Facebook page. The meeting took place on September 18, 2008, and included four professors from the department as well as the Dean. At this meeting, all ten students, including the Pridgen brothers, were found guilty of non-academic misconduct. On November 20, 2008, the Appellant's received a letter from Dean Tettey advising them that their comments “clearly caused unwarranted professional and personal injury to Prof. Mitra and clearly meets the criteria for non-academic misconduct as outlined in the University of Calgary Calendar”. Keith Pridgen was put on probation for 24 months, and both brothers were required to write a letter of apology to Prof. Mitra and refrain from posting or circulating defamatory material regarding any faculty members of the University of Calgary. The Pridgen brothers appealed the decision to the University of Calgary Review Committee and later to the Board of Governors of the University of Calgary however neither of these attempts succeeded in having the decision overturned. == Opinion of the Court == Eight main issues to be determined were laid out by the Honourable Madam Justice J. Strekaf: (a) Does the Charter apply to the disciplinary proceedings taken by the Respondent; (b) If, so were the Applicants' Charter rights infringed; (c) Were the actions taken by the University ultra vires the jurisdiction of the Province of Alberta; (d) Did the Board of Governors err in refusing to hear the Applicants appeals; (e) Were the Applicants' denied a fair hearing; (f) Did the Review Committee provide adequate reasons for its decisions; (g) Did the Review Committee err in concluding that the activities of the Applicants constituted non-academic misconduct; and (h) What, if any, remedy should be granted to the Applicants. The Court determined from previous cases that "a non-government entity may still be subject to the Charter of Rights and freedoms when implementing a specific government policy or program". Justice Strekaf distinguished that the University was acting as agent of the provincial government in providing accessible post-secondary education services to students in Alberta pursuant to the provisions of the PSL Act. Justice Strekaf felt there was sufficient evidence to show that universities in Alberta have some level of reliance on government funds and therefore they are not a "Charter free zone". Justice Strekaf concluded that comments made by Keith and Steven Pridgen, regarding Professor Mitra, on Facebook did not constitute academic misconduct and the Pridgen brothers' right to freedom of expression, under section 2(b) of the Charter, was infringed by the University of Calgary Review Committee.
Read more →
Sprite (computer graphics)

In computer graphics, a sprite is a two-dimensional bitmap that is integrated into a larger scene, most often in a 2D video game. Originally, the term sprite referred to fixed-sized objects composited together, by hardware, with a background. Use of the term has since become more general. Systems with hardware sprites include arcade video games of the 1970s and 1980s; game consoles including as the Atari VCS (1977), ColecoVision (1982), Famicom (1983), Genesis/Mega Drive (1988); and home computers such as the TI-99/4 (1979), Atari 8-bit computers (1979), Commodore 64 (1982), MSX (1983), Amiga (1985), and X68000 (1987). Hardware varies in the number of sprites supported, the size and colors of each sprite, and special effects such as scaling or reporting pixel-precise overlap. Hardware composition of sprites occurs as each scan line is prepared for the video output device, such as a cathode-ray tube, without involvement of the main CPU and without the need for a full-screen frame buffer. Sprites can be positioned or altered by setting attributes used during the hardware composition process. The number of sprites which can be displayed per scan line is often lower than the total number of sprites a system supports. For example, the Texas Instruments TMS9918 chip supports 32 sprites, but only four can appear on the same scan line. The CPUs in modern computers, video game consoles, and mobile devices are fast enough that bitmaps can be drawn into a frame buffer without special hardware assistance. Beyond that, GPUs can render vast numbers of scaled, rotated, anti-aliased, partially translucent, very high resolution images in parallel with the CPU. == Etymology == According to Karl Guttag, one of two engineers for the 1979 Texas Instruments TMS9918 video display processor, this use of the word sprite came from David Ackley, a manager at TI. It was also used by Danny Hillis at Texas Instruments in the late 1970s. The term was derived from the fact that sprites "float" on top of the background image without overwriting it, much like a ghost or mythological sprite. Some hardware manufacturers used different terms, especially before sprite became common: Player/Missile Graphics was a term used by Atari, Inc. for hardware sprites in the Atari 8-bit computers (1979) and Atari 5200 console (1982). The term reflects the use for both characters ("players") and smaller associated objects ("missiles") that share the same color. The earlier Atari Video Computer System and some Atari arcade games used player, missile, and ball. Stamp was used in some arcade hardware in the early 1980s, including Ms. Pac-Man. Movable Object Block, or MOB, was used in MOS Technology's graphics chip literature. Commodore, the main user of MOS chips and the owner of MOS for most of the chip maker's lifetime, instead used the term sprite for the Commodore 64. OBJs (short for objects) is used in the developer manuals for the NES, Super NES, and Game Boy. The region of video RAM used to store sprite attributes and coordinates is called OAM (Object Attribute Memory). This also applies to the Game Boy Advance and Nintendo DS. == History == === Arcade video games === The use of sprites originated with arcade video games. Nolan Bushnell came up with the original concept when he developed the first arcade video game, Computer Space (1971). Technical limitations made it difficult to adapt the early mainframe game Spacewar! (1962), which performed an entire screen refresh for every little movement, so he came up with a solution to the problem: controlling each individual game element with a dedicated transistor. The rockets were essentially hardwired bitmaps that moved around the screen independently of the background, an important innovation for producing screen images more efficiently and providing the basis for sprite graphics. The earliest video games to represent player characters as human player sprites were arcade sports video games, beginning with Taito's TV Basketball, released in April 1974 and licensed to Midway Manufacturing for release in North America. Designed by Tomohiro Nishikado, he wanted to move beyond simple Pong-style rectangles to character graphics, by rearranging the rectangle shapes into objects that look like basketball players and basketball hoops. Ramtek released another sports video game in October 1974, Baseball, which similarly displayed human-like characters. The Namco Galaxian arcade system board, for the 1979 arcade game Galaxian, displays animated, multi-colored sprites over a scrolling background. It became the basis for Nintendo's Radar Scope and Donkey Kong arcade hardware and home consoles such as the Nintendo Entertainment System. According to Steve Golson from General Computer Corporation, the term "stamp" was used instead of "sprite" at the time. === Home systems === Signetics devised the first chips capable of generating sprite graphics (referred to as objects by Signetics) for home systems. The Signetics 2636 video processors were first used in the 1978 1292 Advanced Programmable Video System and later in the 1979 Elektor TV Games Computer. The Atari VCS, released in 1977, has a hardware sprite implementation where five graphical objects can be moved independently of the game playfield. The term sprite was not in use at the time. The VCS's sprites are called movable objects in the programming manual, further identified as two players, two missiles, and one ball. These each consist of a single row of pixels that are displayed on a scan line. To produce a two-dimensional shape, the sprite's single-row bitmap is altered by software from one scan line to the next. The 1979 Atari 400 and 800 home computers have similar, but more elaborate, circuitry capable of moving eight single-color objects per scan line: four 8-bit wide players and four 2-bit wide missiles. Each is the full height of the display—a long, thin strip. DMA from a table in memory automatically sets the graphics pattern registers for each scan line. Hardware registers control the horizontal position of each player and missile. Vertical motion is achieved by moving the bitmap data within a player or missile's strip. The feature was called player/missile graphics by Atari. Texas Instruments developed the TMS9918 chip with sprite support for its 1979 TI-99/4 home computer. An updated version is used in the 1981 TI-99/4A. === In 2.5D and 3D games === Sprites remained popular with the rise of 2.5D games (those which recreate a 3D game space from a 2D map) in the late 1980s and early 1990s. A technique called billboarding allows 2.5D games to keep onscreen sprites rotated toward the player view at all times. Some 2.5D games, such as 1993's Doom, allow the same entity to be represented by different sprites depending on its rotation relative to the viewer, furthering the illusion of 3D. Fully 3D games usually present world objects as 3D models, but sprites are supported in some 3D game engines, such as GoldSrc and Unreal, and may be billboarded or locked to fixed orientations. Sprites remain useful for small details, particle effects, and other applications where the lack of a third dimension is not a major detriment. == Systems with hardware sprites == These are base hardware specs and do not include additional programming techniques, such as using raster interrupts to repurpose sprites mid-frame.
Read more →
Scalable Video Coding

Scalable Video Coding (SVC) is a video compression standard developed jointly by the ITU-T and the ISO/IEC. The two organizations formed the Joint Video Team (JVT) to create the H.264/MPEG-4 AVC standard (ITU-T Rec. H.264 | ISO/IEC 14496-10 AVC). SVC aims to provide adaptable or scalable content, allowing a single encoded video stream to be decoded at various bitrates, resolutions, and quality levels, thus catering to diverse devices and network conditions. == History == In October 2003, the Moving Picture Experts Group (MPEG) issued a Call for Proposals on SVC Technology. Fourteen proposals were submitted, twelve of which utilized wavelet compression, while the remaining two were extensions of H.264/MPEG-4 AVC. The proposal from the Heinrich-Hertz-Institut (HHI) was selected by MPEG as the foundation for the SVC standardization project. In January 2005, MPEG and the Video Coding Experts Group (VCEG) agreed to finalize SVC as an amendment to the H.264/MPEG-4 AVC standard. In November 2008, Google launched Gmail Video Chat, which employed an H.264/SVC codec, marking the first consumer application of the standard. This service was succeeded by Google+ Hangouts in 2012. In 2011, Google Code highlighted SVC as the successor to the open-source RVC video chat engine, noting its prominence in 2010. == Principles of scalability == === Overview === Scalability refers to the ability to represent a video signal at multiple levels of detail within a single encoded bitstream. This enables decoding of a base layer for basic quality and additional enhancement layers for progressively higher quality. SVC defines three types of scalability: Spatial scalability: Supports multiple resolution levels. Temporal scalability: Enables varying frame rates. Quality scalability: Provides different image quality levels. === Spatial scalability === Spatial scalability allows the reconstruction of video at different resolutions, such as QCIF, CIF, or SD. This is achieved through a pyramidal decomposition into multiple spatial layers. === Temporal scalability === Temporal scalability adjusts the frame rate of the decoded video stream. Various frame rates are supported using a hierarchical structure of video frames. === Quality scalability === Quality scalability, or Signal-to-Noise Ratio (SNR) scalability, improves the signal-to-noise ratio of a layer, reducing quantization distortion between the original and reconstructed images. SVC supports two approaches: Fine Grain Scalability (FGS) and Coarse Grain Scalability (CGS). ==== Coarse Grain Scalability (CGS) ==== CGS incorporates quality scalability across spatial resolutions. Each spatial resolution is encoded as a separate layer, refining texture and motion data. For a given resolution, quality scalability is achieved by encoding multiple quality layers with progressively finer quantization steps, starting from a base layer with minimal quality. ==== Fine Grain Scalability (FGS) ==== FGS enables progressive refinement of transformed coefficients within a single spatial layer. The base quality layer is encoded using the AVC standard with an initial quantization parameter (QP) ensuring minimal acceptable quality. Subsequent refinement layers reduce the QP by six, halving the quantization step. The refinement data stream can be truncated at any point, allowing fine-grained quality scalability.
Read more →
Digital exhibition

Digital Exhibition includes both the projection technologies, such as High Definition, and delivery technologies of a film to a movie theater. Delivery technologies include disk drives, satellite relay, and fiber optics. This can save money in distribution but is usually more expensive overall due to maintenance and standardization of technology. However, there are benefits to digital exhibition, for example it requires less assembly by the exhibitor and can contain the trailers that the distributor wishes.
Read more →
Watcher Entertainment

Watcher Entertainment is an American digital media and entertainment company, founded by Steven Lim, Shane Madej, and Ryan Bergara. The channel features a variety of comedy, paranormal, gaming, cooking, and educational shows – typically hosted by Madej and Bergara. The Watcher main channel has over 400 million views and 2.9 million subscribers. The company launched their own streaming service, WatcherTV, in 2024. == History == === Buzzfeed and the creation of Watcher Entertainment (2019) === Madej, Bergara, and Lim met while working at the digital media company BuzzFeed. Madej and Bergara were co-hosts of the popular true crime and paranormal series Buzzfeed Unsolved and Lim was the creator and co-host of the popular internet food series Worth It. Both shows generated a combined 2 billion views with 15 billion minutes watched, making them two of the most successful shows on Buzzfeed. In 2019, Madej, Bergara, and Lim quit Buzzfeed as full-time employees. They each stayed on as contracted employees to complete their respective shows. The trio credited their departure to their desire to found a company with more "creative opportunities" and the ability to have "actual ownership of the content" made. The company is majority-owned by the trio. They received funding from Neuro, a caffeinated energy gum company; Boba Guys, a bubble-milk tea chain; and Steve Chen, a YouTube co-founder. Watcher Entertainment gained its name from the infamous true crime case of The Westfield Watcher, which Madej and Bergara had covered in a Buzzfeed Unsolved episode. The trio began the company as co-CEOs; however, Bergara and Madej stepped down from the role in 2023 to focus on content creation. === Watcher Entertainment (2020–present) === Watcher Entertainment was launched in January 2020. The company debuted with seven series and a weekly interactive talk show: Homemade, Grocery Run, Weird Wonderful World, Puppet History, Tourist Trapped, Top 5 Beatdown, Spooky Small Talk, and Watcher Weekly. The channel reached over 300,000 subscribers within the first month of launching. They were signed by talent agency CAA in the same year. Puppet History, a comedy educational game show, quickly became a success and gained a significant audience. The show, which stars Madej as a fluffy blue puppet, has spanned seven seasons and led to the creation of a variety of merchandise. It has featured a variety of guest stars on every episode, including other former Buzzfeed employees. The company premiered its first horror series in July 2020 with Are You Scared?. Following the end of Buzzfeed Unsolved: Supernatural in 2021, the studio premiered its highly anticipated successor, Ghost Files, just months after. The show followed a similar format, with Bergara and Madej investigating reportedly haunted locations and attempting to find evidence of the paranormal. The show had significant success, with critics noting the improved production value and design from its predecessor. In 2023, Bergara and Madej went on a tour across the United States to premiere episodes of the second season. The series was renewed for a third season, which they premiered with a United Kingdom tour in 2024. That year, Watcher premiered a light-hearted successor to the graphic Buzzfeed Unsolved: True Crime, with Mystery Files. In this rendition, Bergara or Madej present unusual crime or supernatural mysteries with a collection of theoretical solutions. The show was met with great success by audiences and was quickly renewed for a second season. Watcher launched a second channel, 'WatcherPodcasts,' in October 2023. The channel features podcasts hosted by Lim, Bergara, and Madej. On April 19, 2024, the company launched its Watcher streaming service. Going forward, all of their content would be released exclusively on the service and the company planned to transition away from YouTube. This announcement was met with overwhelmingly negative reactions from their fans, with many calling for the company to reverse the decision. Additionally, their YouTube channel lost over 50,000 subscribers in the day following the announcement. On April 22, 2024, the company issued an apology and changed their decision, stating that episodes would instead be released on the streaming service a month before their premiere on YouTube. In May 2025, the channel 'Andrew, Steven, and Adam' was launched as a subsidiary of Watcher with the release of the second season of Travel Season. Travel Season is a spiritual successor to Worth It with the same cast of Lim, Andrew Ilnyckyj, and Adam Bianchi. The channel focuses on food reviews and the behind of the scenes of making it. The main channel is now set to be focused primarily on horror, creepy, and paranormal content. == Channels and shows == === Watcher === ==== Current shows ==== Puppet History (2020–present) A whimsical puppet host walks through history's wildest tales as two guests compete for the title of history wizard. Making Watcher (2020–present) What happens when 3 creators with no business experience decide to make their own company? A multi-series documentary on the journey of creating Watcher Entertainment. Weird Wonderful World (2020–present) Curious pals Madej and Bergara explore lesser-known destinations and the fascinating subcultures within them. Too Many Spirits (2020–present) Bergara and Madej read and rate audience-submitted ghost stories, while getting progressively more tipsy drinking cocktails prepared by Steven and Ricky Wang. Top 5 Beatdown (2020–present) Bergara and Madej compare asinine top 5 lists with a topical expert, inspiring surprisingly heated debate. Are You Scared? (2020–2022, 2024–present) Bergara reads the internet's scariest stories (some true, some false) to his pal Madej as they try to figure out if the story is experienced or imagined. Ghost Files (2021–present) Bergara and Madej investigate haunted locations to discover whether something paranormal really lies within. Mystery Files (2023–present) Bergara and Madej present unusual crime or supernatural mysteries with a collection of theoretical solutions. Survival Mode (2023–present) Bergara and Madej play a variety of horror games and give a spooky review. ==== Former shows ==== Grocery Run (2020) Madej interviews a celeb on their typical grocery run, before returning to their home to help prepare their signature dish. Homemade (2020) Lim examines popular food by comparing an elevated restaurant experience vs. a home-cooked experience. Spooky Small Talk (2020) Bergara interviews celebs in a haunted house, exposing their fears and if they can manage it, a little about themselves too. Social Distancing D&D (2020) Socially Distance along with the motley gang of Watchers as they embark on a great quest of Dungeons and Dragons! Tourist Trapped (2020) Begara and Madej battle for tour guide supremacy, highlighting the two sides of a city, tourist attractions and hidden gems. Watcher Weekly (2020–2021) Lim, Bergara, and Madej chat the week's content and answer questions, with the occasional musical guest! Dish Granted (2021–2022) A show where host and amateur home cook Lim attempts to create the most extravagant dishes for his friends. Pretty Historic (2022) Selorm and guests explore beauty and fashion trends from history, try them, and decide whether the trends should remain in the past or come to the present. Worth a Shot (2022–2023) Take a seat at a Master Mixologist's bar as pro Ricky Wang crafts the unbelievable into a digestible drink for his guests. === Watcher Podcast === ==== Current shows ==== Get Scared with Shane, Ryan, and Steven (2023–2025) Previously named 'Pod Watcher' Madej, Bergara, and Lim host a weekly podcasts, exploring a variety of topics and answering viewer questions. Guests occasionally appear to replace one host. Matt Real serves as the producer and a fourth voice for the podcast. For Your Amusement (2023–present) Bergara explores a variety of topics surrounding theme parks. === Andrew, Steven, and Adam === Travel Season (2024–present) Lim reunites with Worth It costars Andrew Ilnyckyj and Adam Bianchi in a new food review show. == Awards and nominations ==
Read more →
Digital sculpting

Digital sculpting, also known as sculpt modeling or 3D sculpting, is the use of software that offers tools to push, pull, smooth, grab, pinch or otherwise manipulate a digital object as if it were made of a real-life substance such as clay. == Sculpting technology == The geometry used in digital sculpting programs to represent the model can vary; each offers different benefits and limitations. The majority of digital sculpting tools on the market use mesh-based geometry, in which an object is represented by an interconnected surface mesh of polygons that can be pushed and pulled around. This is somewhat similar to the physical process of beating copper plates to sculpt a scene in relief. Other digital sculpting tools use voxel-based geometry, in which the volume of the object is the basic element. Material can be added and removed, much like sculpting in clay. Still other tools make use of more than one basic geometry representation. A benefit of mesh-based programs is that they support sculpting at multiple resolutions on a single model. Areas of the model that are finely detailed can have very small polygons while other areas can have larger polygons. In many mesh-based programs, the mesh can be edited at different levels of detail, and the changes at one level will propagate to higher and lower levels of model detail. A limitation of mesh-based sculpting is the fixed topology of the mesh; the specific arrangement of the polygons can limit the ways in which detail can be added or manipulated. A benefit of voxel-based sculpting is that voxels allow complete freedom over form. The topology of a model can be altered continually during the sculpting process as material is added and subtracted, which frees the sculptor from considering the layout of polygons on the model's surface. After sculpting, it may be necessary to retopologize the model to obtain a clean mesh for use in animation or real-time rendering. Voxels, however, are more limited in handling multiple levels of detail. Unlike mesh-based modeling, broad changes made to voxels at a low level of detail may completely destroy finer details. == Uses == Sculpting can often introduce details to meshes that would otherwise have been difficult or impossible to create using traditional 3D modeling techniques. This makes it preferable for achieving photorealistic and hyperrealistic results, though, many stylized results are achieved as well. Sculpting is primarily used in high poly organic modeling (the creation of 3D models which consist mainly of curves or irregular surfaces, as opposed to hard surface modeling). It is also used by auto manufacturers in their design of new cars. It can create the source meshes for low poly game models used in video games. In conjunction with other 3D modeling and texturing techniques and Displacement and Normal mapping, it can greatly enhance the appearance of game meshes often to the point of photorealism. Some sculpting programs like 3D-Coat, Zbrush, and Mudbox offer ways to integrate their workflows with traditional 3D modeling and rendering programs. Conversely, 3D modeling applications like 3ds Max, Maya and MODO are now incorporating sculpting capability as well, though these are usually less advanced than tools found in sculpting-specific applications. High poly sculpts are also extensively used in CG artwork for movies, industrial design, art, photorealistic illustrations, and for prototyping in 3D printing. == 3D print == Sculptors and digital artists use digital sculpting to create a model (or Digital Twin) to be materialized through CNC technologies including 3D printing. The final sculptures are often called Digital Sculpture or 3D printed art. While digital technologies have emerged in many art disciplines (painting, photography), this is less the case for digital sculpture due to the higher complexity and technology limitations to produce the final sculpture. == Sculpting Process == The best way to learn sculpture is by understanding primary, secondary and tertiary forms. First, break down the object you want to make down its basic shapes, such as a sphere or cube. Focus on making the large, overall shape of the object. After that, work on the bigger shapes on top of or inside the object. These can be protrusions or cut outs. Then, do a final detail pass, such as pores or lines to break up the shape. == Sculpting programs == There are a number of digital sculpting tools available. Some popular tools for creating are: Traditional 3D modeling suites are also beginning to include sculpting capability. 3D modeling programs which currently feature some form of sculpting include the following:
Read more →
IAmAnas

#IAmAnas (I Am Anas) is a Twitter hashtag and social media campaign that started in 2015. Users tweeted to express support for the undercover investigative works of Ghanaian journalist Anas Aremeyaw Anas. The campaign restarted in 2018 when the Ghanaian MP and financier of the New Patriotic Party, Kennedy Agyapong, announced his intention to reveal the identity of Anas following the journalist's exposé of corruption at the Ghana Football Association. Anas maintains that "being anonymous has always been his secret weapon." Pictures purported to be of Anas were first released by a TV station owned by Agyapong, and were quickly picked up by other media houses. At least one person, a Dutch-Brazilian model, has claimed ownership of one picture that was released, and has threatened legal action against Agyapong for possibly putting his life in danger. In response to Agyapong, social media users retweeted photos of themselves, random people, or even comic images of entities that resemble the trademark covered face of Anas. When the hashtag first began in 2015, along with other popular uses of the journalist's name, Elizabeth Ohene wrote an article about Ghanaians use of humour in response to dealing with the expose of government corruption. "I do not know when these words will make it into Wikipedia or the Oxford English Dictionary but for the moment you can take it from me that: To go undercover is to anas, to make secret recordings is to anas-anas, to wear disguises is to do an anas, to be caught in the act is to be anased. To have someone exposed taking bribes is to have that person being given the full Anas Aremeyaw Anas."
Read more →
CloudLibrary

CloudLibrary (stylized as "cloudLibrary") is a cloud-based software system through which libraries lend electronic books; it is also the name of the app that users download to access the e-books. CloudLibrary was created in 2011 by 3M as part of its library systems unit as a competitor to OverDrive, Inc.; in 2015 3M sold the North American part of that unit to Bibliotheca Group GmbH, a company founded in 2011 that was funded by One Equity Partners Capital Advisors, a division of JP Morgan Chase. By 2019, Bibliotecha had tried, unsuccessfully, to negotiate with Amazon to add Kindle-ebook compatibility to cloudLibrary - something that, as of then, Amazon had only made available to Overdrive. In that year, cloudLibrary, along with hoopla offered by Midwest Tape, ODILO, and Baker & Taylor’s Axis 360, were the main competitors to the Overdrive and Libby apps offered by OverDrive, Inc. in the library e-book market. In April 2024, Bibliotheca sold cloudLibrary to the nonprofit cooperative OCLC. By that time, cloudLibrary was used by around 500 libraries in around 20 countries in around 50 languages, and was used to lend audiobooks, digital magazines, newspapers, and comics, and streaming media, along with e-books.
Read more →